Conventional Mesh Conveyor Belts

Conventional Mesh Conveyor Belt, also known as stainless steel mesh belt or chain link conveyor belt.This type belt uses a simple design with continuous spiral coils interwoven together to form an open grid.The rim of the link can be jointed or welded.RISEN's belt design is simple and practical, providing end users with an economical and lightweight solution for low-load conveying applications, suitable for lightweight applications in drying and cooling applications.

Chain link mesh conveyor belts consist of interwoven continuous spirals that look like chain fences.This universal conveyor belt is the simplest metal ribbon yet is fully functional and economical when transporting lightweight applications.Due to its large open area, the chain belt makes it ideal for drying, cooling and heating where energy efficiency is the most important.

The light belt of the wire mesh belt consists of a segment connected with a splicing rod.A single element consists of a flat oval or circular circular wire helix alternating left and right.The edge of the wire mesh belt can be welded or bent.

Unlike balanced weave belts, which consist of alternating left and right spiral coils, chain conveyor belts consist of unidirectional coils.For friction drive belts, the belt has alternating left and right sections.To counteract the tracking problems caused by the unidirectional coil pattern, cross bars are inserted into the belt - one is right-braided and the other is left-braided.

Features of RISEN's Conventional Mesh Belt:

•  Simple structure. It is made of several spiral coils. Suitable for light-duty use in drying and cooling applications

•  Economical. Economic and lightweight solution for low load conveying applications. The simple structure make it economical than other types of conveyor belt.

•  Functional. The stainless steel Conventional Mesh Belt is suitable for lifting, conveying lightweight products.

•  Different edge. We can supply welded or knuckled edge for your choice.

•  Baffles are available. Side and center baffles can be added to the conveyor belt. Baffles can prevent the products from falling down to the ground. It is also useful for sorting and conveying.

•  Chain link drive. The chain link drive pattern can ensure the smooth and high efficient working.

The Types of Belts:

1.Chain Link Belt Without Rod Reinforced

2.Chain Link Belt With Rod Reinforced

Because the cross rod passes through the interconnected helix, the rod-enhanced link belt is stronger than the traditional link belt.The rod not only increases the strength of the belt, but also makes the belt stable during delivery.

3.Chain Duplex Link Belt With Rod Reinforced

In addition to the standard rod reinforced chain belt, there are also rod reinforced double chain belt with double interwoven helix.This double-sided chain belt has a smaller opening area and greater strength.Compared with the general link belt, the rod reinforced link belt has the advantages of large bearing capacity, large opening area and low cost, so it has a wider application prospect.

Available Edges:

RISEN'S Chain Link conveyor belts come with different edge styles, including welded, hinged and chained.Other special edge treatments are available acoording to clients’ requirements.

1.Welded Edge:

At the edge of the belt, the coils are wound together and welded.This is the most common and economical edge treatment.This type of edge finish allows for a relatively smooth finish to the edge of the belt and is the most economical version of this belt style.

2.Knuckled Edge:

The end of each coil wire is bent backwards into a "U" shape and then interlocks with the adjacent coils.The "U" shape is then firmly closed to form a permanent connection with the next coil.This structure also allows for greater flexibility at the edge of the belt and minimizes the stress generated at these locations.

3.Chain Edge

As the mesh edges are completed, these meshes can be driven by side chains using cross bars that pass through the mesh coils and then through the chains at the mesh edges.

Available Materials of the Belts:

NOTED:We can be able to manufacture the belts according to your material requirements.

The Specification of Chain Link Belts without rod reinformed:

These are designed to meet customer requirements, but are generally available in 5.08mm to 25.4mm transverse coil wire pitch, combined with a variety of wire diameters and longitudinal pitch to suit the application.

A: Lateral Coil Pitch (mm) B: Longitudinal Coil Pitch (mm)

C: Wire Diameter (mm)

The Specification of Chain Link Belts with rod reinformed:

A: Lateral Coil Pitch (mm)                          B: Wire Diameter (mm)

C: Longitudinal Cross Wire Pitch (mm) D: Cross Wire Diameter (mm)

NOTED:We can be able to manufacture the belts according to your material requirements.

The Specifications of Chain Duplex Link Belt With Rod Reinforced:

A: Lateral Coil Pitch (mm)                          B: Wire Diameter (mm)

C: Longitudinal Cross Wire Pitch (mm) D: Cross Wire Diameter (mm)

NOTED:We can be able to manufacture the belts according to your material requirements.

Typical Applications:
● Annealing furnaces
● Cleaning machines
● Conveyor machines
● Drying ovens
● Frosters
● Frying facilities
● Ovens

● Refrigeration facilities